| Place of Origin: | American |
|---|---|
| Brand Name: | SUN |
| Certification: | cc |
| Model Number: | CXHA-XZN |
| Minimum Order Quantity: | 1 |
| Price: | RMB/1000-10000/PC |
| Packaging Details: | wooden case/carton |
| Delivery Time: | 3days |
| Payment Terms: | T/T |
| Supply Ability: | 10PCS/days |
| Brand: | SUN | Model: | CXHA-XZN |
|---|---|---|---|
| Cavity: | T-16A | Series: | 3 |
| Capacity: | 80 Gpm | Maximum Operating Pressure: | 5000 Psi |
| Maximum Valve Leakage At 110 SUS: | 1 Drops/min. | Valve Hex Size: | 1 1/4 In. |
| Highlight: | Low Leakage SUN Cartridge Valve,High Pressure SUN Cartridge Valve,Corrosion Resistant SUN Cartridge Valve |
||
Product Description
Free-flow, nose-to-side check valves are on/off circuit components that allow free flow from the inlet (port 1) to the outlet (port 2) and block flow in the opposite direction.
Two-port check valves share the same cavity for a given frame size, however, pay close attention as flow paths may be in opposite directions.
Check valves offer extremely low leakage rates with a maximum leakage of less than 1 drop per minute (0,07 cc/min).
Will accept 5000 psi (350 bar) at ports 1 and 2.
Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
Corrosion resistant cartridge valves are intended for use in corrosive environments and are identified by the model code suffix /AP or /LH (see CONFIGURATION section). For further details, please see the Materials of Construction page.
Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Brand | SUN |
| Model | CXHA-XZN |
| Mounting Style | Threaded or slip-in |
| Pilot Pressure Range | 100-300 PSI |
| Maximum Pressure | 5000 PSI |
| Port Type | NPTF |
| Cavity | T-11A |
| Valve Type | Cartridge Valve |
| Solenoid Tube Diameter | .75 in. |
| Dimensions | 1.5 x 1.5 x 2.5 inches |
FAQ
Q1: Wonder if you accept small orders?
A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.
Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.
Q3: What's your payment terms ?
A3: By T/T,LC AT SIGHT,100% full payment.
Q4: How long is your production lead time?
A4:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.
Q5: When can I get the quotation ?
A5: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.