| Place of Origin: | Denmark |
|---|---|
| Brand Name: | Danfoss |
| Certification: | cc |
| Model Number: | 530200A5821AAAAAS |
| Minimum Order Quantity: | 1 |
| Price: | RMB/100-100000/PC |
| Packaging Details: | wooden case/carton |
| Delivery Time: | 3 work days |
| Payment Terms: | T/T |
| Supply Ability: | 10PCS/days |
| Type: | Electric | Voltage: | 220V |
|---|---|---|---|
| Shaft Length: | 2 Inches | Ambient Temperature: | 0-20°C |
| Frequency: | 50Hz | Shaft Type: | Keyed |
| Warranty: | 1 Year Limited Warranty | Model: | AEA4VSO180DRG/30R-PPB13N00 |
Product Description:
Advantages and features of Danfoss cycloidal motors
High performance:
High volumetric efficiency and mechanical efficiency: It adopts advanced flow distribution mechanism design, has the characteristics of high flow distribution accuracy and automatic wear compensation, and has high volumetric efficiency and mechanical efficiency.
High power density: Under given working conditions, it can provide efficient power output, with high working efficiency and high continuous performance.
Reliable and durable:
Sturdy design: It adopts high-strength housing and stator with pin teeth and split flow distribution plate design, which is durable.
Long life: It still has a very long service life even under high pressure, and has a long high-pressure operation life.
Corrosion resistance: Some models use corrosion-resistant parts to withstand challenging harsh conditions.
Flexible application:
Multiple models and options: Models with different displacements and pressures, as well as various flanges, output shafts, oil ports and other installation and connection forms, meet different application requirements.
Wide range of application: Applicable to various fields such as construction machinery, agricultural machinery, forestry machinery, special machinery, etc.
Flexible installation: Compact and stable design, small size, easy installation and layout.
Good low-speed performance:
Low-speed stability: It can still produce stable output at low speed and has high starting torque.
Wide speed range: It can be steplessly adjusted and has a wide speed range.
High load-bearing capacity:
Strong radial and axial load-bearing capacity: It adopts double-jointed angular ball bearings or tapered roller bearing support design, which can withstand large radial and axial loads.
Precautions for the use of Danfoss cycloidal motors
Installation requirements:
Installation and fixation: The mounting bracket must have sufficient rigidity, the output shaft should be coaxial with the center line of the connected coupling, and the mounting surface should be perpendicular to the output shaft axis.
Pipeline connection: When the inlet and return oil pipes are steel pipes, the stress of the pipeline must be completely removed, and no force is allowed to act on the motor.
Oil filling and exhaust: After installation and before starting, fill the motor housing with clean hydraulic oil from the two oil ports and exhaust.
Operation and maintenance:
Avoid overload: The motor cannot be used at maximum speed and maximum pressure at the same time.
Regular inspection: Check the cleanliness and oil level of the hydraulic oil regularly, replace the hydraulic oil and clean the oil filter in time.
Pay attention to the oil state: If the color of the oil turns black, there may be an overheating problem; if the oil is emulsified, there may be water contamination.
Run-in operation: Before the motor reaches full load, it should be run-in. It is recommended to run-in at less than 30% of the maximum working pressure for 1 hour.
Special precautions:
Back pressure control: Excessive back pressure will damage the internal seal of the motor. It is recommended that the back pressure does not exceed 5MPa. If the back pressure exceeds this range, it is recommended to connect the external leakage oil pipe.
Avoid radial load: Motors without radial force bearing design should avoid radial loads on the motor output shaft.
Prevent cavitation: Although the motor does not have cavitation problems, if the oil is too thick, it will cause cavitation and damage to the oil pump when starting in cold weather.
Oil viscosity: When selecting hydraulic oil, all components in the system should be taken into consideration and adjusted appropriately to obtain the best viscosity range.
| Application | Industrial Machinery |
| Enclosure | IP55 |
| Body Diameter | 35mm |
| Operating Temperature | 0-50°C |
| Cooling Method | Fan |
| Output Current | 10 A |
| Country Of Origin | Germany |
| Type | Electric |
| Voltage | 220V |
| Shaft Length | 2 inches |
FAQ
Q1: Wonder if you accept small orders?
A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.
Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.
Q3: What's your payment terms ?
A3: By T/T,LC AT SIGHT,100% full payment.
Q4: How long is your production lead time?
A4:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.
Q5: When can I get the quotation ?
A5: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.