| Place of Origin: | Japan |
|---|---|
| Brand Name: | DAIKIN |
| Certification: | cc |
| Model Number: | V15A1RY-95 |
| Minimum Order Quantity: | 1 |
| Price: | RMB/100-10000/PC |
| Packaging Details: | wooden case/carton |
| Delivery Time: | 3 work days |
| Payment Terms: | T/T |
| Supply Ability: | 10PCS/days |
| Protection: | Short Circuit, Overcurrent, Overvoltage | Pressure Rating: | 5000 PSI |
|---|---|---|---|
| Discharge Pressure: | Up To 10,000 PSI | Pressure Range: | Up To 10,000 PSI |
| Life Time: | ≥ 5 Million Times | Body Material: | Stainless Steel |
| Rotating Speed: | 1450r/min | Warranty: | 1 Year |
| Highlight: | New Original Piston Pump,High Efficiency Piston Pump,Stainless Steel Piston Pump |
||
Product Description:
Advantages and features of DAIKIN piston pumps
Low noise operation:
DAIKIN piston pumps can achieve low noise operation throughout the entire pressure range and are suitable for noise-sensitive environments.
High efficiency:
The power loss is small, the fluid temperature rises slowly, and the oil tank can be designed to be smaller, thus saving space.
High reliability:
It has high responsiveness, high stability and long life, which can significantly improve the reliability of the host.
Mature technology and extensive verification:
Adopting mature technology, it has been widely verified in the market and has high reliability.
Low maintenance cost:
Consumable parts (such as seals and plungers) are easy to replace and have low maintenance costs.
Diversified and high-performance design:
A variety of models and specifications are available to meet the needs of different application scenarios.
Some models support electro-hydraulic proportional control, which is more convenient to integrate with digital systems.
Precautions for the use of DAIKIN piston pumps
Hydraulic oil requirements:
The hydraulic oil temperature should be maintained at 0-60℃, and the kinematic viscosity (40℃) should be between 32-46mm²/s. ISO VG32 aviation hydraulic oil is recommended.
Keep the cleanliness of the hydraulic oil within the requirements of NAS 10 level or JB/T 7858-95 acceptance standards.
Installation precautions:
Oil filling port position: When installing the pump, the oil filling port position should be upward.
Shaft alignment: It is recommended to use a flexible coupling, the maximum axial error is less than 0.25mm, and the maximum angle error is less than 0.2°.
Suction port pressure: The suction port suction pressure is recommended to be between -16.7 and +50KPa, and 0 to +50KPa is recommended when the pump speed is higher than 1800r/min.
Suction line: The suction line should be as short and straight as possible, avoid right angles, and should be well sealed.
Drain line: The drain line should ensure that the pressure in the pump cavity is less than 0.1MPa, the impact force is less than 0.5MPa, the piping length should be less than 1m, and the pipe end is immersed in oil.
Starting precautions:
At the beginning of the start, it should be confirmed whether the rotation direction of the hydraulic pump is consistent with the direction marked on the body.
It is not allowed to enter full speed operation rapidly at the initial start-up. The motor should be turned on/off repeatedly several times to discharge the air in the oil pipe before entering continuous operation.
Leakage oil pipeline:
The leakage oil pipeline must return to the oil tank directly and without throttling. It cannot be connected with other return oil tank pipelines. The end of the leakage oil pipeline must be below the lowest liquid level of the oil tank and as far away from the suction pipe as possible.
Through reasonable selection, correct installation and maintenance, DAIKIN piston pumps can perform excellent performance in various industrial applications and ensure stable operation of the system.
| Max Pressure | 31.5 |
| Number Of Plungers | 1-8 |
| Maximum Solids Handling | Up to 1 inch |
| Work Pressure | 5000 psi |
| Cable Length | 6m |
| Input Power | 1-100 |
| Power Source | Electric, Diesel, Gasoline |
| Protection | Short circuit, overcurrent, overvoltage |
| Pressure Rating | 5000 PSI |
| Discharge Pressure | Up to 10,000 PSI |
FAQ
Q1: Wonder if you accept small orders?
A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.
Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.
Q3: What's your payment terms ?
A3: By T/T,LC AT SIGHT,100% full payment.
Q4: How long is your production lead time?
A4:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.
Q5: When can I get the quotation ?
A5: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.